Skip to content
Kitchen Extract Cleaning Co.
A stainless steel commercial oven in a professional kitchen with a large ventilation hood

What the grease readings on your clean report mean

Reports · 21 November 2026 · 2 min read · Kitchen Extract Cleaning Company

Grease note summary

The readings are grease depths in microns, taken before and after the clean at set points. The industry limit is a mean of 200 microns between cleans, and 500 or more anywhere means clean it now.

A proper extract cleaning report has a page of numbers on it. Most kitchen managers file it without reading it. They are worth a minute, because they are what an insurer looks at.

What is being measured

The technician measures how thick the grease layer is at fixed points: in the canopy, the plenum, along the duct and at the fan. The unit is the micron, a thousandth of a millimetre. The usual method is a deposit thickness test, done by a trained technician (BESA). Each point is measured before the clean and again after it.

The two numbers that matter

According to BESA:

  • grease should not go above a mean of 200 microns between scheduled cleans, and
  • any area at 500 microns or more needs cleaning straight away.

So the “before” readings tell you whether your interval is right. If they keep coming in well above 200, the system is getting dirtier than it should between visits and the interval is too long. The “after” readings show the clean worked.

Reading the report

Look for:

  • A list or drawing of test points, so you can see the whole system was covered.
  • Before and after figures for each point, not one average for the system.
  • Photos taken from the same positions, before and after.
  • Areas not reached, with the reason. These are the ones to follow up.

AXA Connect lists before and after grease readings among the things it expects to see in a post-clean report, alongside photos, the method and the chemicals used.

When a reading is high

A high “before” reading is information, not a failure: it says to clean more often. A high “after” reading, or a section with no reading at all, is the one to question. Ask the firm why, and whether that section needs an access panel or a second visit.

If your report has no numbers

Then it is a record that someone visited, not proof of a clean to the standard. Next time, book a firm that measures. A kitchen extract cleaning company found through our form will be asked for a full report. See the certificate page for everything a report should contain, and the regulations page for intervals.

Sources

Get a price for your kitchen

Where the kitchen is and how to reach you. We do the searching.

Free to you: we pick out a specialist extract cleaner for your area and tell you its name first. Your details reach that firm only once you agree.

Kitchen location and contact details

By sending this form you agree that we'll use your details to find a local kitchen extract cleaning firm for you. We'll tell you who they are and ask you before passing your details on. See our privacy notice.

Get a quote